VULCAN 3 -500
Gift (case + 2 pens + filling + cleaning cloth + ruler + sticker + medal)
The rifle is the latest release in the Vulcan series,
The AGT VULCAN 3 offers several significant improvements over the previous generation.
One of the most important changes is that the VULCAN 3 will be available with two barrel lengths: 500 mm and 700 mm.
Air capacity has been greatly expanded, with the outer and inner air cylinders combined doubling the total capacity compared to previous versions.
Design
Bullpup Design At first glance you can tell it's one of the many Bullpup designs with the rear mounted chute and compact design. The more you use it, the more you'll like its overall design and build quality.
The walnut on the gun is super smooth and nicely finished.
How is Vulcan 3 different from Vulcan 2?
The folks at AGT have redesigned the monoblock, which is now machined from a single solid piece for improved rigidity and performance. They’ve also redesigned the cylinder head, which is now 38mm wide instead of the original 32mm, and I have to say it’s very quiet in use.
At the end of the cylinder you will find a cap that can be removed to reveal a 1/2" UNF so you can add a muffler to make it quieter if you
You want to.
Side working mechanism
This is a really neat gun. You can move the side lever from left to right with just a hex key, so there's no need to take it to a gunsmith.
The arm is cylindrical and relatively short at only 25mm long. It is mounted without rotation, but is cut smoothly so that it slides between your finger and thumb while aiming.
There is also an internal regulator, which is set to 100 bar for release.
Trigger
There is a small manual safety lever system directly in front of the trigger, which is easy to operate with the gun mounted. Pull it back to make the gun "safe" or push it forward to fire. It is set at just over 1 pound of pull weight, followed by a crisp and very easy release.
If you want to modify it, you will have to remove the stock, which is easily done,
Mineral refinery
The outer shell of these cups is made of a metal alloy, and they look very sturdy. Filling the magazine is easy, just rotate the solid, synthetic inner core of the magazine slightly counterclockwise until you see enough space to drop the bullets, then continue rotating the inner core while
Drop the plug until it is full.
Upper and lower bridge with catenary
Hungarian The upper part is wide, measuring 20 cm in length,
While underneath there is a 16cm long chute to attach the bipod. I like how it protrudes about 5cm below the air cylinder from the end of the stock.
The one-piece bridge now slopes 20 MOA for scope mounting. Perfect for long range shooting and the slope is designed for those who want
In FAC shooting at longer ranges. This is mainly because it is designed for shooting at distances over 100 meters.
Specifications
- Caliber: 6.35 mm
-Barrel: 500 mm
-Suitable: 10 shots
-Length: 79.7 cm
-Weight: 3.4 kg
Air tank volume: 450cc
Filling pressure: 300 bar
Brand: Air gun Technology
-Made in: Czech Republic
**After completing the purchase process, you will be contacted to issue the permit.
Conditions for purchasing guns and issuing a permit
*The applicant must be over 20 years old for both men and women.
*The applicant must be a Saudi national or a resident with a valid residency registered in the Absher system.
